This is part 3 in a series. Check out Part 1: Creating a circuit and Part 2: Using KiCAD . My CNC setup Some time ago I bought a small CNC with the intended purpose of using it to make PCBs. While I have used the CNC for lots of things, I have never tried to make a PCB. The amount of work involved in trying to figure out all the different software programs needed, as well as how they work, has made me constantly put it off. Most of the time I’ve found a way to work around making a...

This is part 2 in a series. Check out  Part 1: Creating a circuit  and  Part 3: Milling the PCB . Prototype on breadboard In order to make my own PCB for the CGA to analog converter project , the first step is to do what is called schematic capture, and get the schematic drawn in the computer. While it’s certainly possible to draw a schematic in a program like Paint, or using something more sophisticated like Illustrator, using a specialized program is a better choice...

This is part 1 in a series. Check out  Part 2: Using KiCAD  and  Part 3: Milling the PCB . When I got my Commodore 128 I was expecting I would just connect the RGBI TTL output to the GBS-8200 knockoff that I have been using with the BBC Micro’s RGB TTL output. Of course the moment I went to do that I realized that I had an extra pin for Intensity with no place to connect it. I found several circuits online that were supposed to convert the 4 bit TTL output to an analog...

After getting the Mac SE upgraded to 4 megs of RAM and a working internal HD, the next thing to do was to see if I could get a working web browser on it. The SE doesn't have an ethernet card, but it does have built-in AppleTalk networking. I have plenty of PhoneNet adapters. I ended up using another Mac ( the one that I fought to put Linux on ) running MacOS 9 and LocalTalk Bridge to move traffic from LocalTalk to Ethernet and back. It worked well and I was able to mount a share from a...

I've made some more progress on my software that allows the Raspberry Pi to act as a Commodore 64 disk drive. I was amazed at how much more of the IEC protocol was missing from the documents I have. One of the things that I found a little strange about the IEC protocol was there was no way to specify how much of the data you want. Once you say go, the sender is just going to send it all. It turns out that when ATN is asserted it doesn't mean abort , it just means pause. Took quite a...